3D Printers
MAKERBOT
Relay
3D Printer Parts
Nozzle
Filament
ToboFill
eSun
Ducho Filla
Linear Guide Rail
Timing Belt, Pulley and wheel
Lead Screw
Extruder Kit
Display
Cooling Fan
Teflon Tube
Other Sensor
Audio Module
Micro-Controller
Arduino
Display
Linear Guide Rail
Filament
Wheel
Omni Wheels
BO Motor Wheel
Lead Screw
Bolts and Screws
Nut
Bearing
Linear Bearing
Propeller
Switch
Battery
SOLENOID VALVE
Hub Motor
DC Motors
Motor without Gearbox
Servo Motors
Stepper Motor
Motor Driver
DC Motor Driver
Communication
Data Transfer
Wire
Range Sensor
Ultra Sonic
Lidar
Biometric
Finger Print Sensor
Optical Sensor
Other
LED bulb
LED Inverter Bulb
SMPS
R307 Optical Fingerprint Reader Sensor Module
OVERVIEW
- Operating voltage (v): 4.2 ~ 6 VDC
- Current consumption: ≤75mA
- Verification Speed: 0.2 sec
- Scanning Speed: 0.3 sec
- Character file size: 256 bytes
- Template size: 512 bytes
- False Acceptance Rate (FAR): ≤0.0001%
- False Rejection Rate (FRR): ≤0.1%
- Resolution: 500 DPI
- Operating Temperature: -20 ~ +50 °C
- Dimension (mm): 46x 21x 23.5
- Weight (gm): 20
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
The RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA.A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Raspberry Pi 4
RC522 RFID 13.56MHZ Reader Writer Module
RC522 - RFID Reader / Writer 13.56MHz with Cards Kit includes a 13.56MHz RF reader cum writer module that uses an RC522 IC and two S50 RFID cards and has low power consumption, low cost, and compact size read and write chip.The MF RC522 is a highly integrated transmission module for contact-less communication at 13.56 MHz.The module uses SPI to communicate with microcontrollers.
Red Mushroom Cap LAY37-, 11ZS 1NO 1NC DPST, Emergency Stop Push, Button Switch AC 660V 10A, Switch Equipment Lift, Elevator Latching Self Lock
The AC 660V 10A LAY37 DPST Emergency Stop Push Button Switch push button is for Lift, Elevator Latching Self Lock and CNC machines emergency stop. It is made of high-quality material and has a long service life built-in screw-type connecting cable which can be reset by turning the button as the arrows show and not turning inversely.
Rotary Encoder Switch with Push Button| 15 PPR | 5 V
RP Lidar A1M8
OVERVIEW
- Model: RP LIDAR A1M8
- Distance range: 0.2 – 6m (Radius)
- Angular range: 0-360°
- Distance resolution: <0.5mm (1% of the distance)
- Angular resolution: =<1°
- Sample duration: 0.5 Mili Seconds
- Sample frequency: >=2000Hz
- Standoffs: M2.5 x 15mm
- Scan rate: 5.5Hz
- Dimensions (mm): 60x 70x 99
- Weight (gm): 170
RP LIDAR A2M8
OVERVIEW
- Model: RP LIDAR A2M8
- Scanning Range: 18M
- Scan Rate: 5~15Hz,Typical 10Hz
- Distance Range: 0.15 – 12m, Based on white objects with 70% reflectivity
- Angular Range: 0-360 Degree
- Distance Resolution: <0.5mm
- Angular Resolution: 0.45~1.35 degree,Typical 0.9 degree
- Sample Duration: 0.25ms
- Sample Frequency: 2000~8000Hz,Typical 4000Hz
- Battery: Excluded
- Dimensions (mm): 76 x 41 (Diameter x Height)
- Weight (gm): 190
Sanca 4V 0.4Ah Sealed Lead Acid Rechargeable Battery
Sanca 4V 0.5Ah Sealed Lead Acid Rechargeable Battery
