A Motor Driver is an essential device that provides the required voltage and current to a stepper motor so that it gets a smooth operation. This is a DC type Motor that turns in steps. To design a stepper motor driver, selection of proper power supply, microcontroller, and the motor driver is very important. We know that microcontrollers can be used to rotate the motor, but while designing the driver, we have to focus on voltage and current.

Showing all 8 results

Show sidebar

A3967 Stepper Motor Driver For Arduino

235 incl. GST (exc. GST- 199 )
A3967 Stepper Motor Driver For Arduino provides greater flexibility and control over stepper motor and is compatible with most microcontrollers that can output a digital 0 to 5V pulse(0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).It can operate bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capability of 30 V and ±750 mA.

A4988 Stepper Motor Driver Controller Board

136 incl. GST (exc. GST- 115 )
  • Suggested Match: 3A004
  • Color: Red
  • Material: Metal + PCB Board
  • Dimensions (mm): 41x 34x 11
  • Weight (gm): 10

A4988 Stepper Motor Driver Module

83 incl. GST (exc. GST- 70 )
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver which operates from 8 V to 35 V and can deliver up to approximately 1A per phase without a heat sink and 2A per phase with a heat sink.. It is designed to operate bipolar stepper motors in full-step, half-step, quarter-step, eighth-step and sixteenth-step modes.

DRV8825 Stepper Motor Driver with Aluminum Heat Sink

219 incl. GST (exc. GST- 186 )
  • Input Supply Voltage (VDC): 8.2 ~ 42
  • Current Handling Capacity (A): 2.2
  • Continuous Current (A): 1.5 (per phase)
  • Logic Input (V): 2.5 ~ 5
  • Dimensions (mm): 13x 20
  • Weight (gm): 4

Makerbase MKS TMC2209 2209 Stepper Motor Driver

825 incl. GST (exc. GST- 699 )
Tmc2209 have all function of tmc2208, can completely replace tmc2208. At the same time, tmc2209 have better heat dissipation, support bigger current, support sensorless-homing function.

Smoother Module for Stepper Driver Motor V1.0

188 incl. GST (exc. GST- 159 )
Smoother module for stepper driver motor is an add-on module for stepper motors of 3D Printers.The board has free run Ioden to protect the motor performance to induction stresses in the Stromlosen condition of the case.

TB6560 Stepper Motor Driver Board 3A 10V-35V DC

CNC Router Single Axis 3A Stepper Motor driver board is for axis control with Input signal high-speed opto-coupler isolation and a large heat sink to ensure good heat dissipation. This module features semi-flow mode adjustable, semi-flow current adjustable with a variety of semi-flow model and semi-flow current setting function.

ULN2003 Stepper Motor Driver Board

The ULN2003 Driver Module Stepper Motor Driver Board is used for driving and controlling stepper motors. ULN2003 Stepper Motor Driver Board uses the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v) and is easy to use Arduino or another development platform to drive the stepper motor by this diver board. It is an ultra lightweight and high quality board commonly used to run and control small applications stepper motors.