A sensor is a device that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure, or any one of a great number of other environmental phenomena.

Showing 1–12 of 23 results

Show sidebar

3D Touch Auto Leveling Sensor

2,690 incl. GST (exc. GST- 2,280 )
OVERVIEW
  • Voltage:5V
  • current :15mA
  • Max current 300mA
  • Shell material: PC
  • Shell color: White translucent

5-36v Switch Drive High-power MOSFET Trigger Module

The 5-36V SWITCH DRIVE HIGH-POWER MOSFET TRIGGER MODULE is a high power MOS trigger switch driver module and control board with a field-effect tube to adjust the electronic switch. It can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps,  solenoid valves, PWM, motor speed control, lamp brightness. etc.

5A Hall Current Sensor Module ACS712 module

124 incl. GST (exc. GST- 105 )
ACS712 Current Sensor Module - 5A can sense upto 5A of current flow which can accurately measure both AC and DC current in both directions. This sensor operates at 5V and produces an analog voltage output proportional to the measured current.

Anti-Corrosion Water Level Sensor with Ball Float Switch

171 incl. GST (exc. GST- 145 )
Anti-Corrosion Water Level Sensor with Ball Float Switch is a device used to sense the level of liquid within a tank and can actuate a pump, an indicator, an alarm, or another device.

AS608 Optical Fingerprint Sensor Fingerprint Module

1,180 incl. GST (exc. GST- 1,000 )
OVERVIEW
  • Resolution: 500dpi
  • Supply current: <60mA
  • Supply voltage: 3.3V
  • Fingerprint image entry time: <1.0 seconds Peak current: <60mA
  • Window area(mm): 15.3×18.2
  • Communication Interface: USB/UART
  • Dimensions (mm): 46x 21x 24
  • Weight (gm): 20

DC 6-36V M17 Inductive 8mm NPN-NO Proximity Sensor Switch

295 incl. GST (exc. GST- 250 )
OVERVIEW
  • Model: M17 NPN-No
  • Operating Voltage (VDC): 6 ~ 36
  • Output Type: NPN-NO
  • Type: Inductive
  • Detection distance (mm): 8
  • Output Current (mA): 300
  • Working temperature (°C): -25 ~ +70, ±15%
  • Cable Length (m): Approx 1.1m
  • Dimension: 17 mm Screw Diameter
  • Weight (gm): 86

Infrared Obstacle Avoidance Sensor Module

This Infrared Obstacle Avoidance Sensor Module is used for avoidance detection for robotics and other electronics uses. Its very easy to interface directly with Arduino or other micro-controllers and also works with the Raspberry Pi with a voltage range of 3-6 Volts.

MAX6675 Thermocouple Sensor Module

 MAX6675 makes connecting a thermocouple to your Arduino an affordable breeze. The MAX6675 Thermocouple Sensor Module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide an accurate temperature-compensated measurement of the supplied K-Type thermocouple sensor.

MCP4725 I2C DAC Breakout Development Board

MCP4725 I2C DAC Breakout Development Board Module has MCP4725 which is a I2C controlled Digital-to-Analog converter (DAC). It is a very cost-efficient option of DAC that allows you to send an analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. Digital to analog converters are great for sound generation, musical instruments, and many other creative projects.

MPU6050 – Triple Axis Gyro Accelerometer Module

MPU6050 module uses the popular MPU6050 Sensor which includes both a 3 axis accelerometer and a 3 axis gyroscope and can be interfaced through a I2C connection which allows an easy and direct interface between the sensor and a micro controller.

MPU9250 9-Axis Attitude Gyro Accelerometer Magnetometer Sensor Module

944 incl. GST (exc. GST- 800 )
MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module that features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis  accelerometer and gyroscope and the other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis Motion Tracking device that combines a 3-axis accelerometer, gyroscope and magnetometer, and a Digital Motion Processor (DMP).

Optical Endstop Light Control Limit Optical Switch

118 incl. GST (exc. GST- 100 )
OVERVIEW
  • Cable Length (cm): 50
  • Dimensions: 33x 10x 19
  • Weight (gm): 6