A 3D printer is a computer-aided manufacturing (CAM) device that creates three-dimensional objects. Like a traditional printer, a 3D printer receives digital data from a computer as input. However, instead of printing the output on paper, a 3D printer builds a three-dimensional model out of a custom material
10M GT2 Width 6mm White Open Timing Belt For 3D Printer
OVERVIEW
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 10M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
2004 LCD Display RepRapDiscount Smart Controller with Adapter
OVERVIEW
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
215mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
OVERVIEW
- Lead Screw Material: 304 Stainless Steel.
- Length: 215mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size: 10 x 13 x 22 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
3D printer 128×64 Smart LCD controller for ramps 1.4
OVERVIEW
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
5 Meter x GT2 Open Loop Timing Belt 6mm Width for 3D Printer
OVERVIEW
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 5M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
500mm Trapezoidal 4 Start Lead Screw 10mm Thread 2mm Pitch Lead Screw with Copper Nut
OVERVIEW
- Lead Screw Material: 304 Stainless Steel.
- Length: 500mm.
- Diameter: 10mm.
- 4 Start Lead Screw
- Brass Nut Size: 32 (Body Diameter) x 19 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
5V 0.2A 3007 Cooling Fan for Raspberry Pi and 3D Printer
OVERVIEW
- Perfectly fit on the extruder
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
600mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
OVERVIEW
- Lead Screw Material: 304 Stainless Steel.
- Length: 600mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size: 22 (Body Diameter) x 15 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the old thermistor, heater block, sleeving, cooling fan with holder.
Compcon DC 24V Cooling Fan For 3D Printer
OVERVIEW
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
- Brushless motor
Complete Kit of MK8 Extruder with 0.5mm Nozzle (Assembled)
OVERVIEW
- High-Quality Single End Cartridge Heater (Heating Element )
- High-quality stepper motor with larger torque and less heat buildup
- Uniform heating aluminum heater block
- Direct transmission, without the heavy gears, compact size and weight
- The lever mechanism makes filament insertion and extraction a breeze
Ducho Filla ABS 1.75mm 3D Printing Filament 1kg-Black
Highlights 1.75 mm ABS black
Description 3D printer filament ABS Black 1.75 mm 1 Kg