Shop
- All products
- 3D Printer64 products
- Books0 products
- Devices3 products
- Electrical71 products
- Our Products1 product
- OUR ROBOTS4 products
- Power Supply8 products
- Sensor23 products
- SERVICES PROVIDED2 products
- TOBOIDS auto0 products
- TOBOIDS AUTOMATA0 products
- Electronics61 products
- Mechanical31 products
- Lighting4 products
Small 5V 0.3A Turbo Air Intake Fan (Size: 40x40x20mm)
OVERVIEW
- Operating Voltage: 5V DC
- Operating Current: 300mA
- Normal Operating Temperature: 25°C-45°C.
- Weight: 26 gm.
- Life Expectancy: Dual Ball Bearing: 50000 hours.
- Sleeve Bearing: 20000-25000 hours.
- Reliable quality as well as Competitive price.
- Large volume flow and long life expectancy.
- High speed and large air flow.
- Low noise and high efficiency.
Smoother Module for Stepper Driver Motor V1.0
Smoother module for stepper driver motor is an add-on module for stepper motors of 3D Printers.The board has free run Ioden to protect the motor performance to induction stresses in the Stromlosen condition of the case.
SOCIAL ROBOT
This product have 30 days lead time.
Socket Flat head-Countersunk
Brand Standard Unit Metric (mm) Socket Type Socket Flat Head Allen Bolts Pitch 0.5 mm Material (Mild Steel) Black Coated
SPDT Slide Switch
SPDT Slide Switch An electronic switch is an electronic component or device that can switch an electrical circuit, interrupting the current or diverting it from one conductor to another. Adding another pole to the SPDT creates a Single Pole, double-throw (SPDT) switch. Basically, two SPDT switches, which can control two separate circuits, but are always switched together by a single actuator. SPDTs should have six terminals. DPDT is a Single pole double throw switch; this is equivalent to two SPDT switches. It routes two separate circuits, connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which each of the two contacts can be routed. This is a multipurpose STDP Slide Switch. It is medium-sided and perfect for mounting on boards and on enclosures, for which it comes with two holes on its body. Use this as an On/Off switch or just as a general-purpose switch. This switch can also be used to control the direction of a DC Motor. This Product Known as Switch Slide Mini SPDT, SPDT Slide Switch 3 Pin, Slide Switch – SPDT (3pin) On/On, 3 Pin Slide Switch, 3 Pin SPDT Slide Switch.
SPIDER ROBOT
This product have 30 days lead time.
SRR1260-220M Power Inductor (SMD), 22 µH, 4 A, Shielded, 3.7 A, SRR1260
Manufacturer: BOURNS
Manufacturer Part No:SRR1260-220M
Product Range: SRR1260
SS304 Allen Bolt – Socket Head Cap Screw (pack of 5)
These are the standard, most commonly used hexagon nuts with Metric coarse threads made of heat-treated alloy steel. These products find their applications in machinery, automotive, electronic components, electrical, construction, railway, and various industries. these are available in different bolt lengths and sizes. It is made up of Stainless steel (SS304) material which offers high tensile strength and excellent corrosion protection. Stainless steel (SS304) has a higher Mild content and with a matte finish, it gives the steel a lower melting point, more malleability and durability, and better heat distribution. These screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head. Metric screws are also known as A2 stainless steel screws.
SS304 CSK Countersunk Flat Slotted Head Bolt (pack of 5)
SS 304 CSK Countersunk Flat Slotted Head Bolt is a popular machine screw with a slotted head. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, sag-free fit. These bolts are always fully threaded. SS 304 CSK bolts are mostly used in robot chassis and body fitting. They are also found in consumer electronics and other small machinery where high torque fasteners are not necessary. These Bolts are made up of Stainless-steel material which offers high tensile strength and excellent corrosion protection which is the pivotal property of Stainless steel. An alternative for using them without nuts is to install them directly into a compatible female threaded hole on an application.
SS304 Socket Button Head Cap Allen Bolt (pack of 5)
A socket cap bolt, also known as a socket head caps crew, socket screw, or Allen bolt, is a type of cap screw with a cylindrical head and hexagonal drive hole. The term socket head caps crew typically refers to a type of threaded fastener whose head diameter is nominally 1.5 times that of the screw shank (major) diameter. It is made up of Stainless steel (SS304) material which offers high tensile strength and excellent corrosion protection. Stainless steel (SS304) has a higher Mild content and with a matte finish, it gives the steel a lower melting point, more malleability and durability, and better heat distribution. These screws have good chemical resistance and may be mildly magnetic. These products find their applications in electrical, construction, railway, and various industries and are available in different bolt lengths and sizes.
TA6586 Based Motor Driver Module
This TA6586 Based Motor Driver Module is a high power motor driver perfect for driving DC Motors and Stepper Motors and can control up to 2 DC motors with directional and speed control.This motor driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc.
TB6560 Stepper Motor Driver Board 3A 10V-35V DC
CNC Router Single Axis 3A Stepper Motor driver board is for axis control with Input signal high-speed opto-coupler isolation and a large heat sink to ensure good heat dissipation. This module features semi-flow mode adjustable, semi-flow current adjustable with a variety of semi-flow model and semi-flow current setting function.
