Shop
- All products
- 3D Printer64 products
- Books0 products
- Devices3 products
- Electrical71 products
- Our Products1 product
- OUR ROBOTS4 products
- Power Supply8 products
- Sensor23 products
- SERVICES PROVIDED2 products
- TOBOIDS auto0 products
- TOBOIDS AUTOMATA0 products
- Electronics61 products
- Mechanical31 products
- Lighting4 products
MAX4466 Electret Microphone Amplifier with Adjustable Gain Module
- Supply Voltage Operation: +2.4V to +5.5V.
- Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
- Excellent Power-Supply Rejection Ratio: 112dB.
- Excellent Common-Mode Rejection Ratio: 126dB.
- High AVOL: 125dB (RL = 100kΩ).
MAX6675 Thermocouple Sensor Module
MAX6675 makes connecting a thermocouple to your Arduino an affordable breeze. The MAX6675 Thermocouple Sensor Module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide an accurate temperature-compensated measurement of the supplied K-Type thermocouple sensor.
MCP4725 I2C DAC Breakout Development Board
MCP4725 I2C DAC Breakout Development Board Module has MCP4725 which is a I2C controlled Digital-to-Analog converter (DAC). It is a very cost-efficient option of DAC that allows you to send an analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. Digital to analog converters are great for sound generation, musical instruments, and many other creative projects.
MEGA 0E5 5W CERAMIC RESISTOR
- 0.5 Ohm 5 Watt Cement Resistor
- Resistor Type: Fusible Cement
- Resistor Value: 0.5 Ohm
- Wattage: 5 Watt
MG90s TowerPro Servo Motor
OVERVIEW
- Model: MG90S
- Weight(gm): 13
- Operating Voltage (VDC): 4.8 ~ 6.6
- Operating Speed @4.8V: 0.10sec/60°
- Operating Speed @6.6V: 0.08sec/60°
- Stall Torque @ 4.8V (Kg-Cm): 1.8
- Stall Torque @6.6V (Kg-Cm): 2.2
- Operating Temperature (°C): 0 to 55
- Dead Band Width ( μs): 1
- Rotational Degree: 180º
- Servo Plug: JR
- Cable Length (cm): 25
- Dimension: 12.4x 22.8x 32.5
MG995 TowerPro Servo Motor with metal Gear 180 degree
OVERVIEW
- Model: MG995
- Weight(gm): 55
- Operating Voltage (VDC): 4.8 ~ 7.2
- Operating Speed @4.8V: 0.20sec/60°
- Operating Speed @6.6V: 0.16sec/60°
- Stall Torque @ 4.8V (Kg-Cm): 10
- Stall Torque @6.6V (Kg-Cm): 12
- Operating Temperature (°C): -30 to 60
- Dead Band Width ( μs): 1
- Gear Type: Semi-Metal
- Rotational Degree: 180º
- Servo Plug: JR
- Cable Length (cm): 30
- Length (mm): 40.5
- Width (mm): 20
- Height (mm): 44
- Shipment Weight: 0.065 kg
- Shipment Dimensions: 9 × 8 × 6 cm
MGN9H Linear Guide Rail – 0.5M
OVERVIEW
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
MGN9H Linear Guide Rail LM Guideways – 1M
OVERVIEW
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
Micro SD Card Reader Module
OVERVIEW
- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 4.2g
Mini 360 Step Down Buck Converter Power Supply Module
Mini 360 Step-Down Buck Converter Power Module is super compact and capable of knocking down a voltage from 23V to as low as 1V with up to 95% efficiency.This module can be used as a DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply.
Mini MP1584 DC-DC 3A Adjustable Buck Module
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V
- Output Voltage Adjustment: On-board potentiometer
- Output Current: 1.8A (typical), 3.0A (max).
- Ceramic Capacitor Stable
- Internal Soft-Start
- Internally Set Current Limit without a Current Sensing Resistor
MPU6050 – Triple Axis Gyro Accelerometer Module
MPU6050 module uses the popular MPU6050 Sensor which includes both a 3 axis accelerometer and a 3 axis gyroscope and can be interfaced through a I2C connection which allows an easy and direct interface between the sensor and a micro controller.
