Back to products
Electronics
- All products
- 3D Printer64 products
- Books0 products
- Devices3 products
- Electrical71 products
- Our Products1 product
- OUR ROBOTS4 products
- Power Supply8 products
- Sensor23 products
- SERVICES PROVIDED2 products
- TOBOIDS auto0 products
- TOBOIDS AUTOMATA0 products
- Electronics61 products
- Mechanical31 products
- Lighting4 products
AD620 Microvolt/Millivolt Voltage Amplifier Module
This is a High Precision Signal Amplifier Board/Voltage Amplifier Module based upon AD620 Instrumentation amplifier IC and can be used for AC, DC signal amplification with high amplification precision and good linearity.
Ai Thinker A9 GPRS Series Module
OVERVIEW
- Model Name: A9
- Package: SMD54
- Frenquency: 850/900/1800/1900MHz
- GPRS Multi-slot: Class 12
- GPRS Mobile Station: Class B
- Power supply: 3.5~4.2V typical value 4.0V
- Current: 1.14mA@DRX=5 03mA@DRX=9
- AT command: 3GPP TS 27.007, 27.005
- GPRS Class 12: Max 85.6kbps (Up & Down)
- Coding scheme: CS 1,2, 3, 4
- PBCCH: support
- SIM Card: 1.8V/3VUART: 3pcs (including firmware upgrade serial port)ˈbaud rate support 2400~1843200bps, default115200bps
- Antenna: Pad
- Communication Interface: I2C,USB,UART,SDMMC,GPIO,ADC
- Working Temperature: -20°C ~ +75°C
- Dimensons (mm): 19.2x 18x 2.5
- Weight (gm): 3
Ai Thinker ESP-01M WiFi Module
OVERVIEW
- Module Model: ESP-01M
- Package/Case: DIP-18
- Antenna Type: PCB
- Transmit Power (dBm): 802.11b: 16±2 dBm (@11Mbps) 11g: 14±2 dBm (@54Mbps) 802.11n: 13±2 dBm (@HT20, MCS7)
- Receiving Sensitivity: 54 Mbps (3/4 64-QAM): -70dBm 6 Mbps (1/2 BPSK): -88dBm CCK, 1 Mbps : -90dBm CCK, 11 Mbps: -85dBm HT20, MCS7 (65 Mbps, 72.2 Mbps): -67dBm
- UART Baudrate: Support 300 ~ 4608000 bps ˈDefault 115200 bps
- Frequency Range: 2412 ~ 2484MHz
- IO Port: 11
- Security: WEP/WPA-PSK/WPA2-PSK
- Storage Environment: -40 ć ~ 90 ć , < 90%RH
- Interface: UART/GPIO/PWM/ADC
- SPI Flash: built-in 1Mbyte
- Power Supply Voltage: 3.0V ~ 3.6VˈCurrent >300mA
- Dimension (mm): 18x 2.8x 18
- Weight (gm): 3
AMS1117-3.3V, 1A, SOT-223 Voltage Regulator IC (Pack of 5 ICs)
- Low dropout voltage
- Load regulation: 0.2% typical
- Optimized for Low Voltage
- On-chip thermal limiting
- Built-in thermal shutdown
- Good noise rejection
Arduino Due
OVERVIEW
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- Total DC Output Current on all I/O lines: 130 mA
- DC Current for 3.3V Pin: 800 mA
- DC Current for 5V Pin: 800 mA
- Flash Memory: 512 KB all available for the user applications
- SRAM: 96 KB (two banks: 64KB and 32KB)
Arduino Mega ATmega 2560 Board
OVERVIEW
Microcontroller.
54 digital input/output.
Operating Voltage: 5V.
Input Voltage: 7-12V.
Arduino Nano
OVERVIEW
- Microcontroller: Arduino Nano V3.0 ATmega328p CH340G
- Operating Voltage (logic level): 5 V
- Input Voltage(recommended): 7-12 V
- Input Voltage (limits): 6-20 V
- Digital I/O Pins: 6-20 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by the bootloader
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
- Clock Speed: 16 MHz
Arduino Uno
OVERVIEW
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
Arduino Uno R3 CH340G ATmega328p (Clone)
OVERVIEW
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Bourns 10kΩ Sliding Potentiometer 1-Gang Through Hole, PTB0143-2010BPB103
Bourns PTB series slide potentiometers from Bourns feature robust metal construction with a carbon element. These slide potentiometers have a 45 mm to 100 mm travel range and a low profile. It is suitable for audio, TV sets, car radios, amplifiers, mixers, drum machines, synthesizers, PCs, monitors, and appliances.
CERAMIC RESISTOR 4E7- 5W
- Resistance : 4.7 ohm (Ω)
- Resistor type : fusible ceramic cement power resistor
- Power rating : 10W
- Can withstand in high-energy and high-voltages at high temperatures
- Reliable and offers a long service life
CRCW2512100RFKEG SMD Chip Resistor, 100 ohm, ± 1%, 1 W, 2512 [6432 Metric], Thick Film, General Purpose
The Vishay D/CRCW e3 series are standard thick film chip resistors. The resistance range includes E96 and E24 decade values from 1ohm to 10Mohm. CRCW e3 series resistors have a pure tin solder contacts on the Ni barrier layer that provides compatibility with reflow soldering process.
- Automotive grade AEC-Q200 qualified
- EIA 0402, 0603, 0805, 1206, 1210, 1218, 2010, 2512 standard case sizes available
- Stability ΔR/R = 1% for 1000h at 70°C
- Metal glaze on high quality ceramic
- Zero ohm jumper are available for all sizes
- 2mm pitch packaging option for 0603 size
- Available in ±1% and ±5% tolerance
- ±100ppm/K and ±200ppm/K TCR values available
- Operating temperature range -55°C to +155°C
- Maximum power rating is 1W
