3D Printers
MAKERBOT
Relay
3D Printer Parts
Nozzle
Filament
ToboFill
eSun
Ducho Filla
Linear Guide Rail
Timing Belt, Pulley and wheel
Lead Screw
Extruder Kit
Display
Cooling Fan
Teflon Tube
Other Sensor
Audio Module
Micro-Controller
Arduino
Display
Linear Guide Rail
Filament
Wheel
Omni Wheels
BO Motor Wheel
Lead Screw
Bolts and Screws
Nut
Bearing
Linear Bearing
Propeller
Switch
Battery
SOLENOID VALVE
Hub Motor
DC Motors
Motor without Gearbox
Servo Motors
Stepper Motor
Motor Driver
DC Motor Driver
Communication
Data Transfer
Wire
Range Sensor
Ultra Sonic
Lidar
Biometric
Finger Print Sensor
Optical Sensor
Other
LED bulb
LED Inverter Bulb
SMPS
Arduino is a hardware and software company owned by Adafruit. They designs and manufactures all the chips in Arduino brand as well as the softwares.
Arduino Due
OVERVIEW
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- Total DC Output Current on all I/O lines: 130 mA
- DC Current for 3.3V Pin: 800 mA
- DC Current for 5V Pin: 800 mA
- Flash Memory: 512 KB all available for the user applications
- SRAM: 96 KB (two banks: 64KB and 32KB)
Arduino Nano
OVERVIEW
- Microcontroller: Arduino Nano V3.0 ATmega328p CH340G
- Operating Voltage (logic level): 5 V
- Input Voltage(recommended): 7-12 V
- Input Voltage (limits): 6-20 V
- Digital I/O Pins: 6-20 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by the bootloader
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
- Clock Speed: 16 MHz
Select options
This product has multiple variants. The options may be chosen on the product page
Arduino Uno
OVERVIEW
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
Select options
This product has multiple variants. The options may be chosen on the product page
Arduino Uno R3 CH340G ATmega328p (Clone)
OVERVIEW
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Select options
This product has multiple variants. The options may be chosen on the product page
