XTEMOS ELEMENT
AJAX PRODUCTS TABS
A4988 Stepper Motor Driver Module
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver which operates from 8 V to 35 V and can deliver up to approximately 1A per phase without a heat sink and 2A per phase with a heat sink.. It is designed to operate bipolar stepper motors in full-step, half-step, quarter-step, eighth-step and sixteenth-step modes.
Ducho Filla ABS 1.75mm 3D Printing Filament 1kg-Natural
Highlights 1.75 mm ABS Natural
Description 3D printer filament ABS Natural 1.75 mm 1 Kg
LMH12UU Oval Flange Linear Bearing, Bearing for 12mm Shaft
OVERVIEW
The flange and outer cylinder are integrated and the flange is oval-shaped. This gives a lower core height, making this type more suitable for compact designs than the LMK type. LMH 12UU has ID of 12mm.To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.L298N 2A Motor Driver Module
OVERVIEW
- Driver Model: L298N 2A
- Driver IC: Double H Bridge L298N
- Max Supply Voltage (V): 46
- Mx Operating Current (A): 2
- Logical Voltage: 5V
- Driver Current: 2A
- Logical Current: 0-36mA
- Maximum Power (W): 25W
- Dimensions (mm): 44x 44x 28
- Weight (Kg): 25 gm
- Operating Voltage (VDC): 5 ~ 35
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE

24 V Hero Water Solenoid Valve
OVERVIEW
- Brand: Hero water
- Package Contains: 1 Solenoid Valve
- 24 V Hero Water Solenoid Valve Compatible With All Ro Water Purifiers
- Easily Fitted in All Models, No Breaking, no Leaking During Moving and Installing
- 24 V Dc, 0-120 Psi, 2.5 Mm Orifice
4 Channel 5V 10A Relay Module with Optocoupler
4 Channel 5V 10A Relay Module can control a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on . It is also able to control various appliances and other types of equipment with large current.
MGN9H Linear Guide Rail LM Guideways – 1M
OVERVIEW
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
Laser Cutting Services
Precision Laser Cutting
If you are in search of flexible and cost effective laser cutting services, then go no further! Toboids Automata Pvt. Ltd. provide our valued customers with quality laser cutting services. Laser cutting is particularly effective in many areas where rapid production is essential. It’s easy to cut accurately in many materials where traditional manufacturing methods are inefficient. Limits and constraints imposed by traditional manufacturing processes are removed through Laser Cutting, which allows freedom of design and quantities.CONTACT US for more details : +91 9446608594 / sales@toboids.com
Our pricing is provided in Description
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Freemans Stainless Steel Digital Caliper-FDC
- Large LCD displays easily interchangeable Metric and Inch measurement readings.
- Multiple measuring applications including Outside measurement, Inside measurement, Depth measurement and Step measurement.
- Advanced functions include Relative Measurement or the ability to take measurements relative to a pre-set reference point.
- Accuracy of ±0.03mm/0.0012in, Resolution of 0.01mm(0.0005in).
- 1-YEAR WARRANTY CARD. The FREEMANS Digital Caliper comes complete with batteries, and an instruction manual (including warranty card). The product is guaranteed for one year against manufacturing defects. Its IP54 rating protects against dust and water.
5-36v Switch Drive High-power MOSFET Trigger Module
The 5-36V SWITCH DRIVE HIGH-POWER MOSFET TRIGGER MODULE is a high power MOS trigger switch driver module and control board with a field-effect tube to adjust the electronic switch. It can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, PWM, motor speed control, lamp brightness. etc.
10K ohm potentiometer, single variable resistor (Round)
OVERVIEW
Resistance Value of 10K Ohms Adjustable Rotary Control Three-Terminal Configuration Precision Tuning Compact Size & High DurabilityHM-BT4502 Bluetooth Low Energy (BLE) Pass-through Module
OVERVIEW
- Working Voltage(V): 1.8 – 3.6
- Working temperature(℃): – 40 ~125℃ (built-in BLE main IC working range)
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Modulation Frequency(MHz): 2402MHz-2480MHz
- Transient current of receiving data: less than 8mA@3V
- Transient current of sending data: less than 8mA@3V@0dBm
- Current in the low power mode: less than 4uA@3V
- Tx power: – 20dBm ~+8dBm
- Rx sensitivity: -97dBm
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION

DUE Core SAM3X8E 32 bits (Naked)
OVERVIEW
- Microcontroller:AT91SAM3X8E LQFP-144
- Operation Voltage:3.3V
- Input voltage:5V
- Total connector pins:44 + 44 + 28 = 116Pins
- Board dimension:54 x 58mm
4-20mA to 5V Converter for Arduino Industrial Sensor Interface Board
4-20mA to 5V Converter for Arduino Industrial Sensor Interface Board is primarily use to overcome from the process of circuit signal transmission and converts the 4-20mA(or 0-20ma) current signal to a 0-5V or 0-3.3V or 0-10V analog output voltage which can be directly connected to the ADC pin of the microcontroller. Connections are easy and simple with the onboard screw terminal connectors.
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
The RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA.A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
5V 0.2A 3007 Cooling Fan for Raspberry Pi and 3D Printer
OVERVIEW
- Perfectly fit on the extruder
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
ToboFill PLA 1.75mm 3D Printing Filament 1kg-Black
Highlights 1.75 mm PLA black
Description 3D printer filament PLA Black 1.75 mm 1 Kg
Arduino Nano
OVERVIEW
- Microcontroller: Arduino Nano V3.0 ATmega328p CH340G
- Operating Voltage (logic level): 5 V
- Input Voltage(recommended): 7-12 V
- Input Voltage (limits): 6-20 V
- Digital I/O Pins: 6-20 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by the bootloader
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
- Clock Speed: 16 MHz
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m)
OVERVIEW
- Operating Range: 0.1m~12m@90%Reflectivity
- Accuracy: ±6cm@(1-6m)
- Distance Resolution(cm): 1
- Frame Rate(Hz): 100
- Ambient light immunity: 70Klux
- Operating Temperature(℃): 0℃~60℃
- FOV: 2°
- Supply Voltage(V): 5V±0.1V
- Average current(mA): ≤140mA
- Power Consumption(W): ≤0.7W
- Peak current(mA): 200
- Communication Interface: UART / I2C
- Cable Length(cm): 10
- Dimension (mm): 42x 15x 16
- Weight(g): 5g±0.3g
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
ULN2003 Stepper Motor Driver Board
The ULN2003 Driver Module Stepper Motor Driver Board is used for driving and controlling stepper motors. ULN2003 Stepper Motor Driver Board uses the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v) and is easy to use Arduino or another development platform to drive the stepper motor by this diver board. It is an ultra lightweight and high quality board commonly used to run and control small applications stepper motors.
HC-12 433Mhz SI4463 Wireless Serial Module
HC-12 wireless serial port communication module is a new-generation multichannel embedded wireless data transmission module. Its wireless working frequency band is 433.4-473.0MHz, multiple channels can be set, with the stepping of 400 KHz, and there are totally 100 channels.
W1209 Digital Temperature Controller Thermostat Module
W1209 digital temperature controller Module W/ Display is a low-cost 12V temperature controller with 7-segment display and 3 switch keypad for setting temperature and other parameters. It has an incredibly low cost yet highly functional thermostat controller and can intelligently control power to most types of electrical devices based on the temperature sensed by the included high accuracy NTC temperature sensor.
Infrared Obstacle Avoidance Sensor Module
This Infrared Obstacle Avoidance Sensor Module is used for avoidance detection for robotics and other electronics uses. Its very easy to interface directly with Arduino or other micro-controllers and also works with the Raspberry Pi with a voltage range of 3-6 Volts.
XTEMOS ELEMENT