Back to products
Electrical
- All products
- 3D Printer64 products
- Books0 products
- Devices3 products
- Electrical71 products
- Our Products1 product
- OUR ROBOTS4 products
- Power Supply8 products
- Sensor23 products
- SERVICES PROVIDED2 products
- TOBOIDS auto0 products
- TOBOIDS AUTOMATA0 products
- Electronics61 products
- Mechanical31 products
- Lighting4 products
LOBOT LX-16A Smart Serial Dual Axis Digital Servo For RC Robot
OVERVIEW
- Operating Speed: 0.18 sec/60°(4.8V)
- Stall Torque (6V): 17 kg.cm
- Stall Torque (7.4V): 19.5 kg.cm
- Dimensions: 45.2x 24.7x 35mm
- Weight: 52g
- Working voltage: 5-8.4V
- Connector Wire Length: 100mm
- Gear: Metal
- Usage: For RC Robot
Makerbase MKS TMC2209 2209 Stepper Motor Driver
OVERVIEW
Tmc2209 have all function of tmc2208, can completely replace tmc2208. At the same time, tmc2209 have better heat dissipation, support bigger current, support sensorless-homing function.
MG90s TowerPro Servo Motor
OVERVIEW
- Model: MG90S
- Weight(gm): 13
- Operating Voltage (VDC): 4.8 ~ 6.6
- Operating Speed @4.8V: 0.10sec/60°
- Operating Speed @6.6V: 0.08sec/60°
- Stall Torque @ 4.8V (Kg-Cm): 1.8
- Stall Torque @6.6V (Kg-Cm): 2.2
- Operating Temperature (°C): 0 to 55
- Dead Band Width ( μs): 1
- Rotational Degree: 180º
- Servo Plug: JR
- Cable Length (cm): 25
- Dimension: 12.4x 22.8x 32.5
MG995 TowerPro Servo Motor with metal Gear 180 degree
OVERVIEW
- Model: MG995
- Weight(gm): 55
- Operating Voltage (VDC): 4.8 ~ 7.2
- Operating Speed @4.8V: 0.20sec/60°
- Operating Speed @6.6V: 0.16sec/60°
- Stall Torque @ 4.8V (Kg-Cm): 10
- Stall Torque @6.6V (Kg-Cm): 12
- Operating Temperature (°C): -30 to 60
- Dead Band Width ( μs): 1
- Gear Type: Semi-Metal
- Rotational Degree: 180º
- Servo Plug: JR
- Cable Length (cm): 30
- Length (mm): 40.5
- Width (mm): 20
- Height (mm): 44
- Shipment Weight: 0.065 kg
- Shipment Dimensions: 9 × 8 × 6 cm
N20 12V 300RPM Micro Metal Gear Motor With Encoder
OVERVIEW
- Rated Operating Voltage (VDC): 12
- No Load Current (mA): 50
- Stall Current (A): 0.3
- Rated Speed (RPM): 240
- Rated Torque(kg-cm): 0.5
- Stall Torque(Kg-Cm): 4
- No load Speed (RPM): 300
- Gear Ratio: 100 : 1
- Gear Type: Metal
- Shaft Type: D-type Single Side
PCA9685 – 16 Channel 12-Bit PWM Servo Motor Driver I2C Module For Arduino
PCA9685 - 16 Channel 12-Bit PWM Servo Motor Driver I2C Module can control upto 16 free-running PWM outputs with only 2 pins using I2C on Arduino or other Development boards.It is a I2C-controlled PWM driver with a built-in clock and is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs. Moreover you can chain up to 62 of them to control up to 992 servos - all with the same 2 pins.
Push Button Switch PBS-2
OVERVIEW
- Switch Type: Momentary - Round Head
- Permissible Temp For Soldering: 270 deg. C for 5 sec. max
- Permissible Temp For With/Without Load: -20 deg. C to +85 deg. C
- Material – Body: Nylon
Push-Button Switch PBS 1
OVERVIEW
- Switch Type: Momentary - Round Head
- Permissible Temp For Soldering: 270 deg. C for 5 sec. max
- Permissible Temp For With/Without Load: -20 deg. C to +85 deg. C
- Material – Body: Nylon
Push-On Switch 4-Pin Micro Switch
OVERVIEW
- Model Number: Push to ON switch 4-PIN micro switch
- Type: Programmable
- Colour: Yellow and Black
- Suitable For: Indoor
PVC Electrical Insulation Insulation Tape
OVERVIEW
· PVC Electrical Insulation · Black colour
Red Mushroom Cap LAY37-, 11ZS 1NO 1NC DPST, Emergency Stop Push, Button Switch AC 660V 10A, Switch Equipment Lift, Elevator Latching Self Lock
The AC 660V 10A LAY37 DPST Emergency Stop Push Button Switch push button is for Lift, Elevator Latching Self Lock and CNC machines emergency stop. It is made of high-quality material and has a long service life built-in screw-type connecting cable which can be reset by turning the button as the arrows show and not turning inversely.
