WOOCOMMERCE
PRODUCTS ON SALE
Products with sale prices
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.40mm
OVERVIEW:
1. Input: 1.75mm
2. output: 0.40mm
3. Weight: 3g
4. Material: Brass Alloy
5. Compatible with V6
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.60mm
OVERVIEW:
1. Input: 1.75mm
2. output: 0.60mm
3. Weight: 3g
4. Material: Brass Alloy
5. Compatible with V6
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.80mm
OVERVIEW:
- Input: 1.75mm
- output: 0.80mm
- Weight: 3g
- Material: Brass Alloy
- Compatible with V6
Arduino Mega ATmega 2560 Board
OVERVIEW
Microcontroller.
54 digital input/output.
Operating Voltage: 5V.
Input Voltage: 7-12V.
M6 Thread Brass Nozzle – 1.75mm x 0.3mm
Modify your 3D printer to print fine details or large parts with M6 Thread Brass Nozzle range.
M6 Thread Brass Nozzle – 1.75mm x 0.4mm
Modify your 3D printer to print fine details or large parts with M6 Thread Brass Nozzle range.
Sliding block for MGN15H Linear Guide Rail
MGN15H Linear Rail Block for MGN15 Linear Rail Guide
OVERVIEW:
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
- With a steel ball holder/retainer.
MGN9H Linear Guide Rail LM Guideways – 1M
OVERVIEW
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
MGN9H Linear Guide Rail – 0.5M
OVERVIEW
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
3D printer 128×64 Smart LCD controller for ramps 1.4
OVERVIEW
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
2004 LCD Display RepRapDiscount Smart Controller with Adapter
OVERVIEW
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Pulley wheel 6cm Dia. x 4cm Width
OVERVIEW
- Width of pulley : 4 cm
- Diameter of pulley : 6 cm
- Diameter of shaft hole : 6 mm
