WOOCOMMERCE
FEATURED PRODUCTS
Products marked as featured in admin panel
10×4.5 inch -Propeller Pair for Quadcopter (Nylon Black)
Specifications of 10x4.5 inch Propeller Pair
Diameter: 10" (25.4 cm) Pitch: 4.5" (11.43 cm) Material: Nylon Includes one CW rotating propeller and one CCW rotating propeller
150 RPM Single Shaft BO Motor – Straight
OVERVIEW
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
17HS4401S Nema 1.7A 17 Stepper Motor
OVERVIEW
- Nema17 Bipolar.
- Number of Phase: 2.
- Phase Voltage: 2.6Vdc.
- Phase Current: 1.7A.
- Holding Torque: 43N.cm.
- Shaft Diameter: Ø5mm.
- Motor Length: 40mm.
4 Channel Relay Module
ShareTechnical Parameters: Maximum load: AC 250V/10A, DC 30V/10A Trigger current: 5mA Working voltage: 5V Module size: 75 x 55 x 19mm
65mm Wheel for BO Motors (Yellow)
OVERVIEW
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
Arduino Mega ATmega 2560 Board
OVERVIEW
Microcontroller.
54 digital input/output.
Operating Voltage: 5V.
Input Voltage: 7-12V.
Arduino Nano
OVERVIEW
- Microcontroller: Arduino Nano V3.0 ATmega328p CH340G
- Operating Voltage (logic level): 5 V
- Input Voltage(recommended): 7-12 V
- Input Voltage (limits): 6-20 V
- Digital I/O Pins: 6-20 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by the bootloader
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
- Clock Speed: 16 MHz
Arduino Uno R3 CH340G ATmega328p (Clone)
OVERVIEW
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
To mark a product as featured go to Dashboard > Products. Find the product you would like to feature and click the Featured Star.
